A Wall Fire Place Electric Adds Warmth and Style to Any Room
A wall-mounted electric fire place can be a welcoming and cozy focal point to any room. It can be mounted either flush or partially recessed in the wall. If recessed, you must follow the guidelines of the manufacturer for framing and installing the fireplace in the wall.
The installation process is similar to hanging a television or shelving, and most models will require an electrician for the electrical hookup.
Easy to Install
A wall-mounted electric fireplace can add warmth and elegance to any room. It is simple to install and doesn't require venting outside or gas lines. It is also available in a variety of styles and sizes to suit any space in the house. It is important to consider the location of your home before choosing a particular model.
If you want to mount an electric fireplace above your TV, ensure the screen is large enough to accommodate it. Also, consider whether you have furniture that will block the view of the fireplace. A wall-mounted fireplace will allow you to save floor space and create more space within your home.
Installing an electric fireplace that is recessed can be easy if you follow the instructions included with it. First, you will have to frame the opening for the fireplace with 2x6s that are one inch smaller than the finished wall. Mark the center of the opening to the fireplace and the stud locations at intervals of 16 inches across both plates. After you have framed the opening with a level, ensure that it is plumb. Then you can screw the bracket to place. If your fireplace has side brackets, remove them to expose the screws that will be fastened.
Attach the fire unit to the bracket once it is up. Use large washer-head screws and wall anchors. Make sure that all screws are placed into a solid backing. You may have to connect an outlet to the wall. This can be accomplished by a licensed electrician according to local codes.
If you don't have carpentry skills, hire a professional to build out the fireplace wall or install a frame in an existing wall for you. They can also install drywall, tape and mud your walls before you install your fireplace. If you already have a wall, they can paint it to give it a finished appearance. After you've completed these steps the fireplace should be ready for use.
Easy to operate
Simple to operate, a wall-mounted electric fire place is. Many models include the ability to control a remote for the flame effects. electric wall fireplace heaters come with an impressive smartphone application which lets you control the fireplace from any location. Some models can be controlled by voice commands via Amazon Alexa or Google Assistant. These features make wall-mounted electric fires a great addition for any home.
The first step to install an electric fire that is wall-mounted is to review the model's installation instructions. Certain models require the assistance of a professional to install them, whereas others are easy to install yourself. It is crucial to understand the impact of these units and make sure that your wall is able to be able to support them prior to starting. You should also pay attention to which direction the heat will be blowing and whether there are any combustibles nearby.
Certain wall-mounted fireplaces are able to be connected to an outlet, while others have to be hardwired. If you're not sure whether you're able do this yourself safely, you may want to engage an electrician professional. Based on the model, you might need to do some basic framing or a bump-out to accommodate the electrical cord and plug.
Another thing to keep in mind is that the position of your fireplace can have an impact on its performance and appearance. For instance, some people prefer to have their fireplaces at eye level when they're seated on the sofa. If that's you, it's important that your TV be placed over your fireplace.
You can use a spirit-level to mark out the place of the brackets on the wall. This will allow you to determine if the wall is able to support the fire. You can then determine if the wall is drywall or stud and ensure that you have a three-spot outlet within reach of the cord of the fireplace.
Easy to Clean
Modern electric fireplaces that are corner-mounted are a lot easier to clean than their wood-burning or gas counterparts. The reason for this is that they don't use anything, so they don't create ash and creosote build-up. However, they must be cleaned regularly to keep them looking their best and working at their top performance. Fortunately, the cleaning procedure is simple and doesn't require harsh chemicals. You can make use of a cloth slightly dampened by water to wipe the exterior of the fireplace and a dry one to get rid of dust from the inside components.
First of all it is important to make sure the fireplace is fully cool before you begin cleaning it. It is also recommended to unplug the unit or, if wired in, turn off the circuit breaker that is the one that powers it. Avoid using any liquid cleaners on the grates as they could pose an electrical risk. Use a lint-free cloth that is lightly dampened with or lukewarm water. It is also recommended to avoid using any cleaning products which contain abrasive materials, because they can scratch or damage the surface of the fireplace.
Then, wipe the grate down with a damp towel. You may also want to wipe the glass's sides and any other parts of the fireplace that aren't covered by the grate. You can also use a vacuum cleaner with a soft brush attachment to get rid of any dirt or dust from the interior of your fireplace.
Once you've completed this, you can begin cleaning the blower and light bulbs. It's important to keep in mind that you should not use any water on the blower or light bulbs since this could result in an electrical fire. It's better to use a dry microfibre cloth to clean dust from these areas. Make sure you turn off the fireplace prior to beginning to avoid any harm. Be aware that some electric fireplaces don't have ventilation. This is why you must be careful when cleaning them. If you require assistance you must always consult the owner's guide.
Easy to maintain
In-wall electric fire places need minimal maintenance so long they are installed and operated correctly. You should still be able to have your fireplace inspected every year by an electrician to ensure that it's operating safely and effectively. You can keep the glass surface free of dust and dirt by wiping it.
Before cleaning the electric fireplace, you must disconnect the plug and turn it off. This will prevent electrical shocks and any other dangers. You can remove the access panel or glass front of the fireplace once it is turned off. Wipe the surface with a microfibre dry cloth to get rid of fingerprints. If the glass has stubborn spots or stains, you can lightly dampen the cloth with a mixture of water and cleaner before wiping. If your fireplace is equipped with a blower, make sure to use a dry microfibre fabric instead of one that is damp to prevent water getting into any electrical components.
In general it is recommended to avoid using any abrasive cleaning products or paper towels since they can scratch or break your glass. In most cases, you can wipe the glass surface using a lint-free cloth. However, if you notice that the glass is becoming dirty or dull it is possible to make use of a glass cleaner or distilled vinegar to eliminate buildup. You can spray the cleaner directly on the cloth to prevent streaks from appearing on the glass.
If the glass is clean you can replace it and plug it into your fireplace. If your fireplace has a mirrored surface, you might need to gently rub the mirror using a soft towel to remove any streaks. You can also buy glass cleaner sprays in different strengths.
It is also important to clean the air inlets and vents at the bottom of your fireplace. These can get very dusty and can interfere with the fire effect of your fireplace. To get the most effective results, use a dry, soft microfibre towel to wipe these areas. If you're looking to wash an area that is hard to reach, you can make use of compressed air to remove any dust.